How to Sharpen Colored Pencils with the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener

Preparing the Pencil Sharpener

Before you begin sharpening your colored pencils with the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, it is important to properly prepare the device. Taking the time to set up the sharpener correctly will ensure optimal performance and prevent any potential issues. Follow the steps below to prepare the pencil sharpener for sharpening colored pencils:

• 1. Plug in the device: Start by locating a suitable power outlet near your workspace. Insert the plug of the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener into the outlet. Ensure that the power cord is securely connected to the sharpener and the outlet.
• 2. Adjust the pencil guide: The Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener features an adjustable pencil guide to accommodate various sizes of pencils. Locate the pencil guide on the sharpener and adjust it to your desired pencil size by sliding it gently. Make sure to position it firmly enough to hold the pencil in place during sharpening, but not too tight to avoid damaging the pencil.
• 3. Select the desired sharpening settings: This pencil sharpener offers different settings to customize your sharpening experience. Determine the type of sharpening you prefer, such as a fine point or a blunt tip. The Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener allows you to choose between a sharp or blunt end by adjusting the sharpening angle or pressure.

Inserting the Colored Pencil

Properly inserting a colored pencil into the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is essential to ensure efficient and effective sharpening. Follow these steps to insert the colored pencil correctly:

1. Hold the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener firmly in one hand.

• Make sure you have a stable grip on the sharpener to prevent any accidental slips or falls.

2. Take the colored pencil you wish to sharpen and hold it in your other hand.

• Ensure that the pencil is clean and free from any debris that may interfere with the sharpening process.

3. Locate the pencil entry slot on the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener.

• The entry slot is typically located on the top or front of the sharpener, depending on the model.

4. Align the colored pencil with the sharpener's blades.

• Gently insert the colored pencil into the entry slot, making sure the pencil is aligned with the blades.
• Ensure that the pencil is straight and centered to prevent uneven sharpening or damage to the pencil.

5. Push the pencil gently into the sharpener until it is securely held in place.

• Apply slight pressure to guide the pencil further into the sharpener until it is firmly held in position.
• Do not force the pencil or push it too far into the sharpener, as this may cause the pencil tip to break or the sharpener to malfunction.

6. Release your grip on the pencil and the sharpener.

• Ensure that the pencil is securely held in the sharpener before releasing your grip.

Congratulations! You have successfully inserted the colored pencil into the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener. The sharpener is now ready to sharpen your colored pencil for precise and vibrant drawings or colorings.

Choosing the Sharpening Mode

When it comes to sharpening colored pencils using the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, it is essential to select the appropriate sharpening mode. This pencil sharpener offers different modes to ensure that you can achieve the perfect sharpness for your colored pencils. By understanding the different modes available and knowing which one to choose, you can ensure a smooth and precise sharpening experience for your colored pencils.

Here are the different modes available on the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener and the recommended mode for colored pencils:

• Standard Mode: The standard mode is designed for regular graphite pencils. It provides a sharp, fine point that is ideal for everyday writing and drawing tasks. However, for colored pencils, it may sharpen too much of the color core, resulting in wastage and possible breakage.
• Colored Pencil Mode: The colored pencil mode is specifically designed to sharpen colored pencils without removing excessive amounts of the color core. This mode ensures a controlled sharpening process, allowing you to maintain the integrity of the color core and preventing breakage. It provides a slightly blunter point compared to the standard mode, but this is necessary to accommodate the softer and more delicate nature of colored pencils.
• High Volume Mode: The high volume mode is intended for sharpening a large quantity of pencils quickly. While it can be used for colored pencils, it is recommended to use the colored pencil mode for better precision and control.

When sharpening colored pencils with the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, it is recommended to choose the colored pencil mode. This mode ensures that you achieve a sharp point while minimizing color core wastage and reducing the risk of breakage. It strikes a balance between a well-sharpened point and preserving the delicate nature of colored pencils.

Adjusting the Sharpening Angle

The Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is a versatile tool that allows you to achieve the desired sharpening effect for your colored pencils. By adjusting the sharpening angle, you can ensure that your pencils are sharpened to perfection, giving you smooth and precise lines in your artwork.

To adjust the sharpening angle on the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, follow these simple steps:

• Locate the angle adjustment feature on the side or bottom of the sharpener. It is usually labeled or marked for easy identification.
• Use your fingers or a small tool to rotate the angle adjustment dial. Turning it clockwise will increase the sharpening angle, while turning it counterclockwise will decrease the angle.
• As you make adjustments, refer to the user manual or instructions that came with the sharpener for specific angle measurements or recommendations for colored pencils.
• Test the sharpening effect by inserting a colored pencil into the sharpener and sharpening it. If you are not satisfied with the result, continue adjusting the angle until you achieve the desired sharpening effect.

By adjusting the sharpening angle on the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, you can ensure that your colored pencils are sharpened to perfection, giving you optimal performance and vibrant results in your artwork. Experiment with different angles to find the one that works best for your specific colored pencils and artistic style.

• Always handle the sharpener with care and follow all safety precautions to prevent accidents or injuries.
• If you are unsure about the specific angle to use for your colored pencils, consult with the manufacturer or experienced artists for recommendations.
• Regularly clean the sharpener and remove any pencil residue or debris to maintain its performance and longevity.

Operating the Sharpener

Sharpening your colored pencils with the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is a breeze. Follow these simple steps to ensure a perfectly sharpened pencil every time:

• Step 1: Place your colored pencil into the sharpener's pencil slot, making sure it is inserted firmly.
• Step 2: Gently press down on the pencil to engage the sharpener.
• Step 3: Maintain a steady grip on the pencil as the sharpener begins its work.
• Step 4: Listen for the distinct sound of the sharpening completion. This indicates that your pencil is now sharp and ready to use.

The Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener features a powerful motor that delivers 65% faster sharpening, allowing you to get back to your art projects in no time. The sharpener is specially designed to handle colored pencils, ensuring they are sharpened to perfection without any breakage or splintering.

With its long-lasting cutter life, this sharpener can handle frequent use and is built to withstand heavy-duty tasks. The sleek black design adds a touch of sophistication to any workspace, making it a stylish and functional addition to your office or art studio.

• Compatible with colored pencils
• Powerful motor for fast sharpening
• Durable construction for heavy-duty use
• Sleek black design for a stylish workspace

Cleaning the Sharpener

Properly cleaning the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is essential to ensure its longevity and optimal performance. After sharpening colored pencils, follow these steps to clean the sharpener effectively:

• Remove pencil shavings: Begin by unplugging the sharpener from the power source to guarantee your safety. Carefully remove the shavings tray by sliding it out from the front of the sharpener. Empty the tray and dispose of the pencil shavings in a suitable waste bin.
• Wipe down the sharpener: Use a soft, lint-free cloth or a slightly damp cloth to wipe down the exterior of the sharpener. Gently wipe the blades, making sure to remove any residue or pencil dust. Avoid using harsh chemicals or abrasive cleaners, as they may damage the sharpener.
• Clean the blades: To clean the blades, you can use a small, soft brush or a cotton swab dipped in rubbing alcohol. Gently brush off any remaining pencil residue or dust from the blades. Take special care not to touch the blades directly with your fingers to prevent injury.

By regularly cleaning your Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, you can maintain its performance and prolong its lifespan. Here are a few additional tips to help you keep your sharpener in good condition:

• Avoid sharpening excessively dull or broken pencils, as they can cause the blades to wear out more quickly. Instead, use a manual sharpener or a knife to restore the pencil's tip before using the electric sharpener.
• Ensure the sharpener is placed on a stable surface to prevent it from tipping over during use. This will help avoid unnecessary damage and maintain its stability.
• Regularly check the cord and plug for any signs of damage. If you notice any fraying or exposed wires, stop using the sharpener immediately and have it repaired or replaced.

Troubleshooting Common Issues

While the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is designed to provide efficient and reliable sharpening for colored pencils, there are a few common issues that users may encounter. Here are some troubleshooting steps to help address these issues:

• Broken Pencil Tips: If you find that the tips of your colored pencils are breaking during sharpening, try the following steps:

  • Make sure you are using the correct size pencil for this sharpener. It is designed to sharpen pencils of standard diameter, so larger or smaller pencils may result in breakage.
  • Inspect the pencil to ensure it is not already broken. If it is, remove the broken part and try sharpening again.
  • Hold the colored pencil firmly and insert it into the sharpener. Avoid applying excessive pressure as this can cause the tip to break.
  • If the problem persists, try sharpening at a slower speed. This may help to prevent the pencil tip from breaking.

• Irregular Sharpening: If you notice that your colored pencils are not being sharpened evenly or are encountering issues with the sharpening process, here's what you can do:

  • Check the sharpness of the cutter. If the cutter is dull or worn out, it may not provide a clean and even sharpening. Replace the cutter if necessary.
  • Ensure that the pencil is inserted straight into the sharpener. Tilting or angling the pencil can result in irregular sharpening.
  • Inspect the pencil for any irregularities or bumps. If the pencil has uneven surfaces, it may affect the sharpening process. Smooth out any imperfections before sharpening.
  • If none of the above steps work, try cleaning the sharpener. Dust and debris can accumulate over time, affecting the sharpening process. Disconnect the sharpener from the power source and clean it using a brush or compressed air.

• Abnormal Noises: If you hear any unusual noises while sharpening your colored pencils, follow these troubleshooting steps:

  • Inspect the pencil sharpener for any loose or broken parts. Tighten or replace any damaged components.
  • Ensure that the pencil is inserted securely and that it is not wobbling inside the sharpener. A loose pencil may cause unusual noises or vibrations.
  • Check the power source. If the sharpener is not receiving sufficient power, it may produce irregular noises. Ensure that the power cord is securely connected and try plugging it into a different outlet.

By following these troubleshooting steps, you can address common issues that may arise while sharpening colored pencils with the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener. Remember to always follow the manufacturer's instructions and handle the sharpener with care to ensure optimal performance.

Extending Cutter Life

When it comes to sharpening colored pencils with the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, there are a few tips and techniques you can follow to help extend the cutter life of this product. By implementing these suggestions, you can ensure that your sharpener remains efficient and durable for a longer period of time.

Here are some helpful tips on extending the cutter life of the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener:

• Avoid excessive pressure: Applying too much pressure while sharpening colored pencils can cause unnecessary strain on the blades. To prevent this, gently insert the pencil into the sharpener and let the electric motor do the work. Avoid pushing or forcing the pencil into the sharpener to prevent any damage to the blades.
• Alternate between different pencils: Using the same colored pencil repeatedly for sharpening can result in uneven wear on the blades. To prevent this, try alternating between different colored pencils when sharpening. This helps distribute the wear more evenly and ensures that the blades are used uniformly.
• Periodically clean the blades: Over time, colored pencil residue can accumulate on the blades, affecting their performance and lifespan. To avoid this, periodically clean the blades of the sharpener. You can use a soft cloth or a brush to gently remove any debris or residue from the blades. This simple maintenance step can significantly extend the life of the cutter.

By following these tips and techniques, you can extend the cutter life of the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener. These small adjustments in your sharpening routine can make a big difference in the durability and efficiency of this product in the long run.

• Avoid excessive pressure while sharpening
• Alternate between different colored pencils
• Periodically clean the blades to remove debris

Additional Uses

While the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is primarily designed for sharpening colored pencils, it has several other uses that make it a versatile tool for artists, students, and professionals. Here are some additional uses for this excellent product:

• Sharpening Regular Pencils: The heavy-duty construction and powerful motor of the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener make it perfect for sharpening regular graphite pencils. Whether you need a sharp point for detailed drawings or a blunt tip for shading, this sharpener can handle it all. Just insert the pencil and let the sharpener do the rest.
• Sharpening Crayons: Crayons are a popular choice for coloring books and art projects, but sharpening them can be a challenge. With the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener, you can easily sharpen crayons to a fine point or a flat tip, depending on your preference. This feature is particularly useful for artists who want to create different effects with their crayons.
• Sharpening Artist Charcoal Sticks: Artists who work with charcoal know the importance of having a sharp and precise charcoal stick. The Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is up to the task. It can sharpen artist charcoal sticks to a fine point, allowing artists to achieve detailed and intricate drawings with ease.

With its durable construction, powerful motor, and adaptable sharpening mechanism, the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener proves to be an invaluable tool beyond just sharpening colored pencils. Whether you need to sharpen regular pencils, crayons, or artist charcoal sticks, this sharpener delivers exceptional results every time.

• Compatible with regular pencils, crayons, and artist charcoal sticks
• Powerful motor for efficient sharpening
• Strong and durable construction
• Ability to sharpen graphite pencils to a sharp point or a blunt tip
• Creates fine or flat tips for crayons
• Produces sharp and precise charcoal sticks for detailed drawings

Maintenance and Storage

Proper maintenance and storage of the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener are essential to ensure its longevity and optimal performance. Follow these instructions to keep your sharpener in excellent condition when not in use:

1. Unplug the device: Before performing any maintenance or storing the sharpener, make sure to unplug it from the power source. This step ensures your safety and prevents any potential electrical accidents.

2. Store in a dry place: It is important to keep the sharpener in a dry location to avoid any moisture damage. Moisture can lead to rusting, malfunction, or electrical hazards. Find a clean and dry area, such as a desk drawer or a cupboard, to store the sharpener when it's not being used.

3. Protect from dust and damage: Dust can accumulate on the sharpener blades and affect its performance. To keep the sharpener clean, consider using a dust cover or placing it in a small box or pouch to shield it from dust and other particles. Additionally, store the sharpener away from other sharp objects that could potentially damage the blades or the overall structure.

• Regular cleaning: To maintain the sharpener's efficiency, remove any accumulated pencil shavings regularly. This can be done by gently opening the shavings tray, removing the shavings, and disposing of them properly. Be cautious when emptying the tray to avoid any injury.
• Inspect for damage: Periodically check the sharpener for any signs of damage, such as broken parts, loose screws, or frayed cords. If you notice any issues, contact the manufacturer or a qualified technician for repair or replacement.
• Avoid overuse: While the Bostitch Office QuietSharp Executive Heavy Duty Electric Pencil Sharpener is designed for heavy-duty use, it's important not to overuse it. Excessive sharpening can put strain on the motor and blades, resulting in decreased longevity. Allow the sharpener to rest periodically during prolonged use to prevent overheating.